收藏本站
Tantalum Surface Mount Capacitors – Standard Tantalum
T491 Industrial Grade MnO 2 Series
Soldering Process
Peak Temperature (T P )
20 seconds maximum
30 seconds maximum
6 minutes maximum
8 minutes maximum
T P
T L
KEMET’s families of surface mount capacitors are compatible 
with wave (single or dual), convection, IR, or vapor phase reflow 
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profile conditions for convection and IR reflow reflect the profile 
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three reflow passes at these conditions.
Note that although the X/7343–43 case size can withstand wave
soldering, the tall profile (4.3 mm maximum) dictates care in wave 
process development.
Hand soldering should be performed with care due to the difficulty 
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the 
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Profile Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T Smin ) 100°C 150°C
Temperature Maximum (T Smax ) 150°C 200°C
Time (t s ) from T smin to T smax ) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T L to T P ) 3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (T L ) 183°C 217°C
Time Above Liquidous (t L ) 60 – 150 seconds 60 – 150 seconds
220°C* 250°C*
235°C** 260°C**
Time within 5°C of Maximum
Peak Temperature (t P )
Ramp-down Rate (T P to T L ) 6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Maximum Ramp Up Rate = 3oC/seconds t P
Maximum Ramp Down Rate = 6oC/seconds
t L
T smax
T smin
t S
25
25oC to Peak
Time
Construction
Silver Paint
MnO 2 /Ta 2 O 5 /Ta
Silver Adhesive
Washer
Leadframe
(-Cathode)
Carbon
Tantalum Wire
Weld
Leadframe
(+Anode)
? KEMET Electronics Corporation ? P.O. Box 5928 ? Greenville, SC 29606 (864) 963-6300 ? www.kemet.com
T2005_T491 ? 10/8/2013
15
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LQW2UASR62J00L IND 620NH 300MA SRF 375MHZ 1008
ASPI-0615FS-100M-T2 INDUCTOR SHLD POWER 10.0UH SMD
GEM28DTBD-S189 CONN EDGECARD 56POS R/A .156 SLD
A9CAG-0502F FLEX CABLE - AFG05G/AF05/AFE05T
MIC2549A-2BM IC SW CURR LIMIT HI SIDE 8-SOP
MAX6190CESA+ IC VREF SERIES PREC 1.25V 8-SOIC
RE-1509S/H CONV DC/DC 1W 15VIN 09VOUT
A9BAG-0604F FLEX CABLE - AFF06G/AF06/AFE06T
相关代理商/技术参数
T491X686M020AT4068 制造商:KEMET Corporation 功能描述:68.0UF 20.0V - Tape and Reel
T491X686M020AT40687280 制造商:KEMET Corporation 功能描述:68.0UF 20.0V - Tape and Reel
T491X686M020AT4394 制造商:KEMET Corporation 功能描述:68.0UF 20.0V - Boxed Product (Development Kits)
T491X686M020AT7280 制造商:KEMET Corporation 功能描述:Cap Tant Solid 68uF 20V X CASE 20% (7.3 X 4.3 X 4mm) SMD 7343-43 0.7 Ohm 125 制造商:KEMET Corporation 功能描述:CAP 68UF 20V 20% 7.3 X 4.3 X 4MM SMD 7343-43 - Tape and Reel
T491X686M020ZT 功能描述:钽质电容器-固体SMD 68.0UF 20.0V RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk
T491X686M020ZTZ084 制造商:KEMET Corporation 功能描述:68.0UF 20.0V
T491X686M020ZTZ123 制造商:KEMET Corporation 功能描述:68.0UF 20.0V
T491X686M025AH 功能描述:钽质电容器-固体SMD 25volts 68uF 20% RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk